Reconciling human health with the environment while struggling against the COVID-19 pandemic through improved face mask eco-design.

Surgical masks have become critical for protecting human health against the COVID-19 pandemic, even though their environmental burden is a matter of ongoing debate. This study aimed at shedding light on the environmental impacts of single-use (i.e., MD-Type I) versus reusable (i.e., MD-Type IIR) face masks via a comparative life cycle assessment with a cradle-to-grave system boundary. We adopted a two-level analysis using the ReCiPe (H) method, considering both midpoint and endpoint categories. The results showed that reusable face masks created fewer impacts for most midpoint categories. At the endpoint level, reusable face masks were superior to single-use masks, producing scores of 16.16 and 84.20 MPt, respectively. The main environmental impacts of single-use masks were linked to raw material consumption, energy requirements and waste disposal, while the use phase and raw material consumption made the most significant contribution for reusable type. However, our results showed that lower environmental impacts of reusable face masks strongly depend on the use phase since reusable face masks lost their superior performance when the hand wash scenario was tested. Improvement of mask eco-design emerged as another key factor such as using more sustainable raw materials and designing better waste disposal scenarios could significantly lower the environmental impacts.

Selection of homemade mask materials for preventing transmission of COVID-19: A laboratory study.

The Coronavirus Disease 2019 (COVID-19) has swept the whole world with high mortality. Since droplet transmission is the main route of transmission, wearing a mask serves as a crucial preventive measure. However, the virus has spread quite quickly, causing severe mask shortage. Finding alternative materials for homemade masks while ensuring the significant performance indicators will help alleviate the shortage of masks. Referring to the national standard for the "Surgical Mask" of China, 17 materials to be selected for homemade masks were tested in four key indicators: pressure difference, particle filtration efficiency, bacterial filtration efficiency and resistance to surface wetting. Eleven single-layer materials met the standard of pressure difference (≤49 Pa), of which 3 met the standard of resistance to surface wetting (≥3), 1 met the standard of particle filtration efficiency (≥30%), but none met the standard of bacterial filtration efficiency (≥95%). Based on the testing results of single-layer materials, fifteen combinations of paired materials were tested. The results showed that three double-layer materials including double-layer medical non-woven fabric, medical non-woven fabric plus non-woven shopping bag, and medical non-woven fabric plus granular tea towel could meet all the standards of pressure difference, particle filtration efficiency, and resistance to surface wetting, and were close to the standard of the bacterial filtration efficiency. In conclusion, if resources are severely lacking and medical masks cannot be obtained, homemade masks using available materials, based on the results of this study, can minimize the chance of infection to the maximum extent.

Aerosol Filtration Efficiency of Common Fabrics Used in Respiratory Cloth Masks.

The emergence of a pandemic affecting the respiratory system can result in a significant demand for face masks. This includes the use of cloth masks by large sections of the public, as can be seen during the current global spread of COVID-19. However, there is limited knowledge available on the performance of various commonly available fabrics used in cloth masks. Importantly, there is a need to evaluate filtration efficiencies as a function of aerosol particulate sizes in the 10 nm to 10 µm range, which is particularly relevant for respiratory virus transmission. We have carried out these studies for several common fabrics including cotton, silk, chiffon, flannel, various synthetics, and their combinations. Although the filtration efficiencies for various fabrics when a single layer was used ranged from 5 to 80% and 5 to 95% for particle sizes of <300 nm and >300 nm, respectively, the efficiencies improved when multiple layers were used and when using a specific combination of different fabrics. Filtration efficiencies of the hybrids (such as cotton-silk, cotton-chiffon, cotton-flannel) was >80% (for particles <300 nm) and >90% (for particles >300 nm). We speculate that the enhanced performance of the hybrids is likely due to the combined effect of mechanical and electrostatic-based filtration. Cotton, the most widely used material for cloth masks performs better at higher weave densities (i.e., thread count) and can make a significant difference in filtration efficiencies. Our studies also imply that gaps (as caused by an improper fit of the mask) can result in over a 60% decrease in the filtration efficiency, implying the need for future cloth mask design studies to take into account issues of "fit" and leakage, while allowing the exhaled air to vent efficiently. Overall, we find that combinations of various commonly available fabrics used in cloth masks can potentially provide significant protection against the transmission of aerosol particles.